Whole Home Repiping and Pipe Replacement in Southwest Florida

Licensed Repiping Contractor Serving Fort Myers and Southwest Florida

Plumbing work in Florida requires a licensed contractor. Elevate holds Florida Certified Plumbing Contractor License CFC1433600 and carries full liability insurance on every project. Every repiping project is completed by background-checked Team Members. We do not subcontract our licensed plumbing work.

Our main office is located at 5570 Enterprise Pkwy, Fort Myers, FL 33905. From Fort Myers, our crews serve Lee, Collier, Charlotte, Sarasota, and Manatee counties: Fort Myers, Cape Coral, Naples, Bonita Springs, Estero, Lehigh Acres, Marco Island, Punta Gorda, and Port Charlotte.

Homeowners who want to verify credentials before calling can look up Florida Plumbing Contractor License CFC1433600 through the Florida Department of Business and Professional Regulation at myfloridalicense.com. Both the license and proof of insurance are available on request before any work begins.

Repiping requires a plumbing permit in Lee and Collier counties, and the finished work is inspected. Elevate handles the permit application and schedules the inspection with the county. We do not perform work that requires a permit without pulling one first.

Repiping Services for Southwest Florida Homes

Repiping replaces the water supply lines that carry clean water to your fixtures. It is a different job from drain or sewer work, which moves water away from the house. Most repiping projects in this area come down to one of a few situations, and the right scope depends on what the piping is made of and how much of it has failed.

Whole Home Repiping

A whole home repipe replaces every supply line in the house, from the point where water enters to each fixture. This is the right approach when the piping material itself has reached the end of its service life, when leaks have appeared in several different areas, or when the pipe is a material known to fail. Replacing everything at once means the house is done rather than waiting for the next section to go.

Partial Repiping

A partial repipe replaces a defined section rather than the whole system, such as the lines serving one bathroom, a run inside a particular wall, or a length that has failed more than once. This is the right approach when the rest of the system is sound and the problem is genuinely isolated. Our plumber assesses the condition of the piping beyond the immediate failure before recommending a partial, because a partial repipe on a system that is failing everywhere only moves the problem.

Polybutylene Replacement

Homes built across Florida from the late 1970s into the mid 1990s were frequently plumbed with polybutylene, a gray flexible plastic supply line. The material degrades from the inside as it reacts with treated water, and failures typically happen without warning at fittings and along the pipe wall. Polybutylene is no longer approved for use, and insurers commonly ask about it. If your home is from that era and you have not confirmed what your supply lines are made of, that is worth identifying before a failure does it for you.

Copper Pipe Replacement

Copper became the standard supply material in Southwest Florida homes from the 1980s onward, and a great deal of it is now in its fourth decade. Hard water is the reason it does not last indefinitely here. Naples water measures around 323 parts per million, well into the range where mineral content accelerates corrosion at joints and fittings, and the result is pinhole leaks that begin small and recur. When a copper system has produced leaks in more than one location, replacement usually costs less disruption over time than a continuing series of repairs.

When a Repair Is the Better Answer

Not every leak means a repipe. A single failure in an otherwise sound system is a repair, and we say so rather than scoping work that is not needed. Our leak detection and repair page covers that side of the work. The dividing line is usually repetition: one leak is an event, three in the same system is a pattern.

How Elevate Approaches Every Repiping Project

Before anything is scoped, a Team Member identifies what your supply lines are made of, where failures have occurred, and what condition the rest of the system is in. You receive written options with upfront estimates and an explanation of what each approach involves. There is no pressure and no work without your sign-off.

Repiping involves opening walls and ceilings to reach the lines, and we plan that access before starting rather than discovering it as we go. Our plumber walks you through which areas will be opened and what the restoration looks like so there are no surprises mid-project.

Every project includes a written warranty on parts and labor. We also stand behind every job with a 100% money-back satisfaction guarantee: if the completed work does not meet the standard we committed to, tell us, and after a fair opportunity to make it right, we refund the payment. That policy is in writing, not a verbal assurance.

Team Members arrive licensed, background-checked, and equipped for the work. The permit is pulled before work begins and the county inspection is scheduled as part of the project rather than left to you.

Repiping Across Lee, Collier, and Charlotte Counties

What a repiping project involves depends heavily on when the home was built and what was standard at the time, and Southwest Florida has distinct construction eras stacked close together.

In Fort Myers, the established neighborhoods along McGregor Boulevard and through Iona contain a large share of homes from the 1980s and 1990s on original copper, now well past the point where pinhole leaks become routine. Homes from the earlier end of that range are also the most likely candidates for polybutylene. Newer construction in Gateway and along the Daniels Corridor is generally on CPVC or PEX and is not yet a repiping concern.

Cape Coral developed rapidly across several decades, which means piping material can change from one street to the next. The city’s high water table matters here because a supply line failure under a slab can run a long time before anything is visible indoors, and by the time it surfaces the same system has often failed elsewhere too.

In Naples, water hardness around 323 parts per million is the dominant factor. Copper systems in Naples, Bonita Springs, and Estero corrode at fittings faster than the same piping would in a softer water market, and the high proportion of seasonal residents means a failure can go unseen for months. We coordinate with local property managers and can schedule work around owners who are not on-site.

Lehigh Acres, Marco Island, Punta Gorda, and Port Charlotte are all within our regular service footprint. Lehigh Acres in particular mixes construction vintages within a few blocks, so identifying the pipe material is the first step at every address rather than an assumption based on the neighborhood.

If you are unsure whether your address falls in our service area, call or text. We confirm before scheduling.

Frequently Asked Questions About Repiping in Southwest Florida

How do I know whether my home needs repiping or just a repair?

The deciding factor is repetition, not severity. One leak in a system that has otherwise been sound is a repair. Leaks appearing in several different areas, or the same section failing again after being fixed, means the piping material itself is at the end of its life and repairs will keep following each other. Our plumber assesses the condition of the system beyond the immediate leak before recommending either one.

What is polybutylene, and how do I know if my home has it?

Polybutylene is a gray flexible plastic supply line used widely in Florida homes built from the late 1970s into the mid 1990s. It degrades internally over time and tends to fail without warning. You can often identify it by looking at exposed pipe near the water heater or under sinks, where it appears as dull gray plastic rather than copper or white CPVC. If your home is from that era, confirming the material is worth doing before a failure makes the decision for you.

Why do copper pipes fail faster in Southwest Florida?

Hard water. Naples water measures around 323 parts per million, and high mineral content accelerates corrosion at copper joints and fittings. The result is a pinhole leak, which is small at first and tends to recur elsewhere in the same system. A copper system installed in the 1980s here has been carrying that water for close to forty years.

Will repiping mean opening up walls?

Yes, in most cases. Supply lines run inside walls and ceilings, so reaching them requires access. What we can control is that the access is planned rather than exploratory. Before work begins, our plumber walks you through which areas will be opened and what the restoration involves.

Can you repipe only part of the house?

Yes, when the problem is genuinely isolated and the rest of the system is in good condition. A partial repipe makes sense for a single failed run or the lines serving one area. It does not make sense when the same material is failing throughout the house, because the untouched sections will follow. We assess the whole system before recommending a partial.

Do I need a permit to repipe a home in Lee or Collier County?

Yes. Repiping requires a plumbing permit in both counties, and the finished work is inspected. Elevate handles the permit application and schedules the inspection as part of the project. We do not perform work that requires a permit without pulling one first.

My home has had several leaks in the same area. Is that a repiping situation?

It often is. Repeated failures in one section usually mean the pipe in that section has deteriorated rather than that you have had bad luck. The right first step is confirming where the leaks are originating and what condition the surrounding pipe is in, which is covered on our leak detection and repair page. From there the choice between a partial repipe and a whole home repipe becomes straightforward.

What is Elevate’s plumbing license number, and are the plumbers Team Members or subcontractors?

Elevate holds Florida Certified Plumbing Contractor License CFC1433600, verifiable through the Florida Department of Business and Professional Regulation at myfloridalicense.com. Every plumber who arrives at your property is an Elevate Team Member, background-checked, licensed under that number, and covered by Elevate’s liability insurance. We do not subcontract our licensed plumbing work.

Schedule a Repiping Assessment

Call or text Elevate Home Services to schedule a repiping assessment. We serve Fort Myers, Cape Coral, Naples, and the surrounding Southwest Florida area Monday through Saturday, with 24/7 availability for initial scheduling.

(239) 572-4075